Inquiry Now
Leave Your Message
Multifunctional watch LCD
Digital Meter

Multifunctional watch LCD

The multifunctional power instrument (instrument for short below) is particularly developed and manufactured to meet the electrical monitoring requirements of a power distribution system. It accurately measures all common electrical characteristics such as three-phase voltage, three-phase current, and active power.Reactive power, frequency, power factor, and four-quadrant energy, among others; Long-life LCD displays the instrument's measurement parameters and network system functioning information.RS485 communication interface, using the MODBUS RTU communication protocol; with four programmable buttons on the instrument panel, a handy switch, and very flexible programmable parameter settings.

    Product Overview

    There are several different types of extended function modules to choose from: The four-channel analog quantity (0~20mA/4~20mA) output can transmit electrical quantity, while the four-channel switching value input and output can monitor and control local or long-range switch signals ("remote signaling" and "remote control").The device may immediately replace a typical power transmitter, a measuring indication instrument, an electric energy measuring instrument, and any associated auxiliary units. With modular structural design, customers may select the most cost-effective functional configuration based on their specific requirements.

    It is frequently utilized in applications such as energy management systems, supply and distribution network automation, district power control, and entire switchgear sets. It has the benefit of easy installation and maintenance.Sample wiring, small quantity, programmable input parameters, and networkable with various PLCs, industry control computer communications software.

    Technical Parameters

    Technical parameters

    Index

    Input

    Net work

    Three-phase three-wire, three-phase four- wore

    Voltage

    Rated value

    AC 0~500v

    Over load

    Consistent 12 times iostaotaoeos,2 times /30s

    Consumption

    <0.5VA(each phase)

    Impedance

    >500k0

    Current

    Rated value

    AC  1A, SA

    Over load

    Consistent:1 .2 times mstaotaneocs,2 times 11s

    Impedance

    <2m0

    Frequency

    45-65Hz

    Output

    Electric energy

    Output mode

    Two-channel open-collector, optical coupling poise output

    Pulse constant

    Active 3200imp/kwh

    Reactive 3200imp/kvarh

    Start

    On the condition of rated voltage ,reference frequency and cos =1.0, when load operational

    Current is 0.01ln, It can start and measure the electric energy continuously.

    Creep

    When execting115% rated voltage and no current in the current circuitry, the instrument is with no electric energy accumulation and pulse output

    Output

    Communication

    Output mode

    RS485

    Protocol

    MODBUS_RTU

    Baud rate

    1200,2400,4800, 9600

    Analog

    quantity

    Channel quantity

    4 channels

    Output mode

    0-20mA, 4-20mA

    Load ability

    <400W

    Switching value

    Channel quantity

    4 channels

    Output mode

    Normally open relay contact output

    Contact capability

    AC 240V/2A

    Switching value input

    Four channel dry contact input modes

    Display mode

    LCD(Blue back lighting)

    Measuring accuracy

    Voltage, current

    土 (0.5%FS+one digit)

    Active power, reactive power

    士 (0.5%FS+one digit)

    Frequency

    士 0.1H z

    Power factor

    士0 . 01P F

    Active energy

    士0. 5%(only for reference, not for meterage)

    Reactive energy

    士1.0 %(only for reference, not for meterage)

    Source

    Scope

    AC 220V,50/60Hz

    Consumption

    <5VA

    Safety

    With stand voltage

    Input and source

    >2kv50Hz/1m,n

    Input and output

    >1kv50Hz/1min

    Output and source

    >2kv50Hz/1min

    Insulating resistance

    Any two of input, output, source, casing>20MO

    Environment

    Temperature

    Operation>10-50°C

    Storage, -25-70°C

    Humidity

    S85%RH, free of wet and corrosive gas

    Elevation

    ≤3000m

    Function &Shape/Model

    Measure &Display

    Shape Code (Figuer Inside)

    Selected Additional Functions

    Phase VoltageV

    Line Voltage

    Current

    Freuqency

    ower Pator

    Acive Power

    otalReactivePower

    otalpparent Power

    Each Phase

    Power Pactor

     

    Each Phase

    Apparent Power

    Active Energy

    Reactive nergy

    96×96

    80×80

    7

    72×72

    Communication

    interface:R5485

    4-channels witch outputs

    4-chnnels

    switch input

    4-channels analog output

    Harmonic

    SFS-□S3-3E

     

     

     

     

     

    V

     

     

    +

     

     

     

     

    SFS-□SY-3E

     

     

     

     

     

     

     

     

    SFN-□S3-3E

     

     

     

     

     

     

     

     

     

     

     

     

    SFN-□SY-3E

     

     

     

     

    SFN-□S3-3E+4DO

     

     

     

     

     

     

     

     

     

     

    SFN-□SY-3E+4DO

     

     

     

     

     

    SFN-□S3-3E+4DI

     

     

     

     

     

     

     

     

     

     

    SFN-□SY-3E+4DI

     

     

     

     

     

    SFN-□S3-3E+4AO

     

     

     

     

     

     

     

     

     

     

    SFN-□SY-3E+4AO

     

     

     

     

     

     

     

    SFN-□SY-3E+H